Why do we need to maintain the screen light guide regularly？

During the use of the light guide plate, the light guide plate needs to be properly cleaned and maintained. In particular, the light box must be cleaned regularly to ensure its luminous effect. Cleaning the light guide plate can better dissipate heat to prevent the lamp tube from being burnt out. Therefore, pay attention to the following items for proper maintenance, so as to be able to use it better and avoid any malfunctions.

Here is the list of the article:

• Why do we need to take protective measures?

• Why pay attention to details when cleaning?

• Why do we need to do a good job of testing?

Why do we need to take protective measures?

When cleaning the ultra-thin light box with light guide plate, you should use a soft textile dipped in alcohol and wipe it gently, and be careful not to use sharp tools for related operations to avoid scratching the product, so you should not be careless when performing any operations. At the same time, high-efficiency and professional light guide plate manufacturers remind you to be very careful and do adequate protection during installation and transportation, because? In order to avoid the light guide plate lamp tube is relatively fragile, otherwise it is easy to cause chipping, so avoid it.

Why pay attention to details when cleaning?

When the light guide plate is polished, it is necessary to carefully observe whether there are debris or dust residues in the cut, otherwise it will affect the light guide effect. The light guide plate manufacturer emphasizes that especially the outer packaging must be done and the light guide plate must be completely wrapped. There can be no omissions to avoid damage to the place where it meets, and pay attention to the back reflective paper such as the integral packaging of the lamp. , This can ensure a better light guide effect.

Why do we need to do a good job of testing?

After cleaning the light guide plate, it needs to be tested. The light source used must be a regular brand product. This is because the brightness and color produced by the light source will affect the light guide effect. The relevant light guide plate experts suggest that the length of the light guide plate on the side of the light bar should be relatively longer. For example, the lamp tube is obviously shorter than the light guide plate during the test, and the side of the side should be sealed with silver-plated tape.

The above are a few things to pay attention to in the maintenance of the light guide plate light box. In addition, it is difficult to complete such work with the naked eye when testing and judging. Therefore, the light guide plate manufacturers with guaranteed quality recommend using an illuminance meter for the test to obtain an accurate result. And it should be arranged for special personnel to be responsible for checking at regular intervals to ensure that the maintenance requirements can be met to ensure that the environment is sufficiently clean and tidy, and so on.